.jpg&w=3840&q=75)
Stamping Transfer Robot
STC5-1250-400 Stamping Transfer Robot
A 5 kg stamping transfer robot for repetitive press loading and unloading where operator safety and cycle consistency matter.
Payload
5 kg
Reach
1,250 mm
Axes
4
Repeatability
±0.15 mm
Standard body: natural aluminum; base: white.
Problem
Stamping and press-side operations expose operators to repetitive motion, tight timing, and high-risk loading zones. Manual transfer can limit throughput and make production harder to stabilize.
Solution
STC5-1250-400 uses a 4-axis industrial robot structure with 5 kg payload and 1,250 mm reach to automate repetitive handling tasks. SCR Robot can integrate the robot with end-of-arm tooling, conveyors, safety guarding, controls, and production-line layout support.
Benefits
Reduce manual lifting and repetitive operator fatigue. Improve shift-to-shift output consistency with repeatable robot motion. Lower safety risk around palletizing, machine loading, and press-side transfer. Support project-based integration with grippers, conveyors, guarding, PLC/HMI, and site layout design.
Technical parameters
STC5-1250-400 robot specifications
Catalog robot parameters and joint range data for preliminary model comparison. Final selection should be confirmed against tooling, payload center, and production layout.
Robot Parameters
| Model | STC5-1250-400 |
|---|---|
| Series | STC Series |
| Axes | 4 |
| Maximum payload | 5 kg |
| Reach | 1,250 mm |
| Repeatability | ±0.15 mm |
| Body weight | 220 kg |
| Power capacity | 2.0 kVA |
Joint Parameters
| A1 | ±135° |
|---|---|
| A2 | 400 mm |
| A3 | 776-1,250 mm |
| A4 | ±360° |
| A5 | / |
| A6 | / |
Operating temperature
0-45°C
Relative humidity
20-80% RH, non-condensing
Vibration
Below 4.9 m/s²
Environmental limits
No flammable or corrosive gas/liquid. Avoid water, oil, dust, strong electromagnetic sources, and gas-source interference.
Applications
Match this model to your payload, product, and layout.
SCR Robot helps overseas buyers confirm robot payload, reach, tooling, conveyors, safety layout, and cycle-time targets before quotation.
Stamping transfer
Press loading
Press unloading
Forging support
Metal stamping plants
Appliance factories
Automotive parts suppliers
Forging workshops
FAQ
Buying notes for STC5-1250-400.
These questions help overseas purchasing managers prepare the basic information needed for model selection and quotation.
Is STC5-1250-400 suitable for my product?
Selection depends on product weight, dimensions, cycle time, pallet pattern, gripper type, reach, and site layout. Send product photos, dimensions, and target throughput for a model recommendation.
Can SCR Robot provide the complete automation cell?
Yes. The robot can be supplied as part of a complete automation solution including gripper, conveyor, pallet handling, guarding, PLC/HMI, and on-site layout planning.
Are the technical parameters final for every project?
The listed values come from the catalog model data. Final configuration should be confirmed against the exact tooling, payload center, working envelope, and production environment.
What information is needed for a quotation?
Please provide product photos, weight, size, packaging type, hourly output, pallet size if applicable, factory layout, voltage requirements, and destination country.
Project evaluation
Send product photos and receive a model selection proposal.
Include product weight, dimensions, packaging type, target output, pallet size, factory layout, and destination country for a faster quotation.