.jpg&w=3840&q=75)
Four-Axis Palletizing Robot
SCH80-1950-1800 Four-Axis Palletizing Robot
An 80 kg palletizing robot for factories moving heavier packages, drums, bags, or bundled materials at the end of the line.
Payload
80 kg
Reach
1,950 mm
Axes
4
Repeatability
±0.50 mm
Optional A5/A6; standard body/base color: yellow/yellow.
Problem
End-of-line palletizing and material handling are labor-intensive, physically demanding, and difficult to keep consistent across shifts, especially when loads are heavy or cycle times are tight.
Solution
SCH80-1950-1800 uses a 4-axis industrial robot structure with 80 kg payload and 1,950 mm reach to automate repetitive handling tasks. SCR Robot can integrate the robot with end-of-arm tooling, conveyors, safety guarding, controls, and production-line layout support.
Benefits
Reduce manual lifting and repetitive operator fatigue. Improve shift-to-shift output consistency with repeatable robot motion. Lower safety risk around palletizing, machine loading, and press-side transfer. Support project-based integration with grippers, conveyors, guarding, PLC/HMI, and site layout design.
Technical parameters
SCH80-1950-1800 robot specifications
Catalog robot parameters and joint range data for preliminary model comparison. Final selection should be confirmed against tooling, payload center, and production layout.
Robot Parameters
| Model | SCH80-1950-1800 |
|---|---|
| Series | SCH Series |
| Axes | 4 |
| Maximum payload | 80 kg |
| Reach | 1,950 mm |
| Repeatability | ±0.50 mm |
| Body weight | 580 kg |
| Power capacity | 5.75 kVA |
Joint Parameters
| A1 | ±130° |
|---|---|
| A2 | 1,800 mm |
| A3 | ±147° |
| A4 | ±360° |
| A5 | / |
| A6 | / |
Operating temperature
0-45°C
Relative humidity
20-80% RH, non-condensing
Vibration
Below 4.9 m/s²
Environmental limits
No flammable or corrosive gas/liquid. Avoid water, oil, dust, strong electromagnetic sources, and gas-source interference.
Applications
Match this model to your payload, product, and layout.
SCR Robot helps overseas buyers confirm robot payload, reach, tooling, conveyors, safety layout, and cycle-time targets before quotation.
Palletizing
Depalletizing
Heavy material handling
End-of-line automation
Plastic manufacturers
Chemical plants
Food processing factories
Building material factories
FAQ
Buying notes for SCH80-1950-1800.
These questions help overseas purchasing managers prepare the basic information needed for model selection and quotation.
Is SCH80-1950-1800 suitable for my product?
Selection depends on product weight, dimensions, cycle time, pallet pattern, gripper type, reach, and site layout. Send product photos, dimensions, and target throughput for a model recommendation.
Can SCR Robot provide the complete automation cell?
Yes. The robot can be supplied as part of a complete automation solution including gripper, conveyor, pallet handling, guarding, PLC/HMI, and on-site layout planning.
Are the technical parameters final for every project?
The listed values come from the catalog model data. Final configuration should be confirmed against the exact tooling, payload center, working envelope, and production environment.
What information is needed for a quotation?
Please provide product photos, weight, size, packaging type, hourly output, pallet size if applicable, factory layout, voltage requirements, and destination country.
Project evaluation
Send product photos and receive a model selection proposal.
Include product weight, dimensions, packaging type, target output, pallet size, factory layout, and destination country for a faster quotation.