Dedicated Stamping Machine
SCD30-1850-400
A dedicated stamping-machine robot with configurable reach for press automation and repetitive part transfer.
Maximum payload
30/50/80 kg
Reach
1,850/2,150/2,700 mm
Axes
4
Repeatability
±0.15 mm
.jpg&w=3840&q=75)
Technical specifications
SCD30-1850-400 specifications
Use these specifications for preliminary selection. Confirm the final configuration against product data, tooling load, center of gravity and line layout.
| Model | SCD30-1850-400 |
|---|---|
| Series | SCD Series |
| Axes | 4 |
| Maximum payload | 30/50/80 kg |
| Reach | 1,850/2,150/2,700 mm |
| Repeatability | ±0.15 mm |
| Body weight | 500 kg |
| Power capacity | 6.8 kVA |
Catalog note: customizable reach.
| A1 | ±180° |
|---|---|
| A2 | 400 mm |
| A3 | ±145° |
| A4 | ±360° |
| A5 | / |
| A6 | / |
Operating environment
Operating temperature
0-45°C
Relative humidity
20-80% RH, non-condensing
Vibration
≤4.9 m/s²
Environmental limits
No flammable or corrosive gas/liquid. Avoid water, oil, dust, strong electromagnetic sources, and gas-source interference.
FAQ
Is SCD30-1850-400 suitable for my product?
Selection depends on product weight, dimensions, cycle time, pallet pattern, gripper type, reach, and site layout. Send product photos, dimensions, and target throughput for a model recommendation.
Can SCR Robot provide the complete automation cell?
Yes. The robot can be supplied as part of a complete automation solution including gripper, conveyor, pallet handling, guarding, PLC/HMI, and on-site layout planning.
Are the technical parameters final for every project?
The listed values come from the catalog model data. Final configuration should be confirmed against the exact tooling, payload center, working envelope, and production environment.
What information is needed for a quotation?
Please provide product photos, weight, size, packaging type, hourly output, pallet size if applicable, factory layout, voltage requirements, and destination country.
Check this model against your production line
Send product photos, weight, dimensions, target output, pallet or carton specifications and the available floor layout for configuration review.