STC10 Robotic Press Loading, Unloading and Transfer
Part handling and transfer across a multi-press stamping line
This project places STC10 stamping robots between presses to handle parts and transfer them between operations. Robot movements alternate with press cycles, connecting material flow across multiple stamping stages.
On-site configuration
The footage shows presses arranged along a production line, inter-press transfer robots, dedicated end-of-arm tooling and press-side touchscreen panels. Robot travel, tooling and handling paths are matched to the parts, dies and site layout.
Parts moving through successive stamping operations must be removed, transferred and placed at the next station. At this site, robots positioned along the press line move their tooling into the die areas for part handling and withdraw before subsequent press movements. The video shows handling, transfer and press cycles working in sequence across the line.
Stations and movements on site
00:01.5
01
A multi-press layout
Presses are arranged along the line, with transfer robots between stations and touchscreen panels beside the equipment.
00:02.5
02
Inter-press transfer
The robots move parts between adjacent die areas to connect successive stamping operations.
00:05.5
03
Handling in the die area
End-of-arm tooling enters the die working area to handle parts, following a path planned around the die positions.
00:08.5
04
Alternating with press cycles
After the tooling withdraws from the die area, the press performs its subsequent movement. The next handling and transfer sequence follows die opening.
What this application brings together
Robots performing repetitive part handling and transfer between stamping stations.
Transfer paths planned around multiple presses arranged along the production line.
Dedicated end-of-arm tooling matched to the die pickup and placement positions.
Press-side touchscreen panels for local operation.
Planning automated press loading and unloading?
Send part drawings or photos, unit weight, operation sequence, die opening clearance, press spacing, site layout and target cycle time. These inputs support review of robot travel, tooling and station-to-station transfer.
00:01.5
00:02.5
00:05.5
00:08.5